Common vole (Microtus arvalis) ecology and management: implications for risk assessment of plant protection products

Common voles (Microtus arvalis) are common small mammals in some European landscapes. They can be a major rodent pest in European agriculture and they are also a representative generic focal small herbivorous mammal species used in risk assessment for plant protection products. In this paper, common vole population dynamics, habitat and food preferences, pest potential and use of the common vole as a model small wild mammal species in the risk assessment process are reviewed. Common voles are a component of agroecosystems in many parts of Europe, inhabiting agricultural areas (secondary habitats) when the carrying capacity of primary grassland habitats is exceeded. Colonisation of secondary habitats occurs during multiannual outbreaks, when population sizes can exceed 1000 individuals ha^?1. In such cases, in‐crop common vole population control management has been practised to avoid significant crop damage. The species' status as a crop pest, high fecundity, resilience to disturbance and intermittent colonisation of crop habitats are important characteristics that should be reflected in risk assessment. Based on the information provided in the scientific literature, it seems justified to modify elements of the current risk assessment scheme for plant protection products, including the use of realistic food intake rates, reduced assessment factors or the use of alternativee focal rodent species in particular European regions. Some of these adjustments are already being applied in some EU member states. Therefore, it seems reasonable consistently to apply such pragmatic and realistic approaches in risk assessments for plant protection products across the EU. © 2013 Society of Chemical Industry     

Feasibility of using rare earth elements (REEs) to mark and identify escaped farmed Atlantic salmon Salmo salar L.

A series of rare earth elements (REEs) were evaluated as potential markers in scales of Atlantic salmon 1⁺ and 0⁺ smolt by addition of these elements to the feed. Chlorides of 5 REEs were tested, alone or in combination: lanthanum (La), cerium (Ce), praseodymium (Pr), neodymium (Nd) and dysprosium (Dy). The labelled‐diets contained 125 or 250 mg REE kg^?1 feed and were administered for up to 10 weeks. Fish scales were collected and analysed by inductively coupled plasma‐mass spectrometry (ICP‐MS) before start, 5 and 10 weeks after labelling started and finally 2 or 4 months after marking. The results demonstrated that the five tested elements were clearly incorporated into the scales of the fish fed the supplemented diets. Uptake and concentrations increased gradually during the feeding period, and no principal differences were found between the two smolt types. Combining 2 REEs in the same feed did not affect the incorporation of either of them. After a ‘dilution’‐period of 2–4 months the concentrations of all markers (except La) in the scales of the treated‐fish were still significantly higher than those of the untreated‐fish. The background concentrations of the tested markers and some other elements were also measured and found to give interesting information.     

The Fish Industry—Toward Supply Chain Modeling

Mathematical models for simulating and optimizing aspects of supply chains such as distribution, planning, and optimal handling of raw materials are widely used. However, modeling based on a holistic chain view including several or all supply chain agents is less studied, and food-related aspects such as quality and shelf-life issues enforce additional requirements onto the chains. In this article, we consider the supply chain structure of the fish industry. We discuss and illustrate the potential of using mathematical models to identify quality and value-adding activities. The article provides a first step toward innovative supply chain modeling aimed to identify benefits for all agents along chains in the fish industry.     

Using the Gluten Peak Tester as a tool to measure physical properties of gluten

The functional properties of wheat are largely dictated by composition and interactions of the gluten proteins. All flours contain gliadin and glutenin, but produce baked products of varying quality, which provides evidence that gluten proteins from different wheats possess different properties. A common method to study differences in gluten properties, which is utilized in this study, is fractionation/reconstitution experiments to understand how various gliadin to glutenin ratios and how fractions from different wheat sources affect gluten aggregation properties. Gliadin and glutenin from a vital wheat gluten were fractionated with 70% ethanol and reconstituted at various gliadin to glutenin ratios. Gliadin and glutenin from a Canadian eastern soft, eastern hard and western hard wheat (14% moisture) were fractionated and substituted between flours at the native gliadin to glutenin ratio. Gluten combinations were evaluated with a Gluten Peak Tester at constant temperature and mixing. Varying gliadin to glutenin ratio showed that 50:50 is optimal for fast gluten aggregation while amount of glutenin dictates strength. Substitution experiments showed that replacing good quality gluten fractions with those from a lower quality wheat decreases gluten quality, and vice versa. Data also showed that cultivar specific differences in gliadin and glutenin are more important in dictating gluten strength (torque), while gliadin to glutenin ratio dictates aggregation time (PMT) independent of the source of fractions. The study demonstrated the ability of the improved method to evaluate gluten aggregation by controlling for all variables except the one being tested. The data also revealed information about gluten aggregation properties never before seen.     

Losses of essential mineral nutrients by polishing of rice differ among genotypes due to contrasting grain hardness and mineral distribution

The effect of different polishing techniques on loss of mineral elements from rice grains was quantified using a panel of indica and tropical japonica genotypes, previously classified as differing in ease of polishing. Gradients in mineral elements across the bran-endosperm interface were quantified using micro-scaled precision abrasive polishing in combination with inductively coupled plasma mass spectrometry and synchrotron X-ray fluorescence microscopy. Frictional polishing, similar to that of commercial mills, i.e. 8–10% loss of grain weight, reduced the concentration of Fe, Mg, P, K and Mn by 60–80% in all genotypes. Following gentler polishing (3–5% weight loss), genotypes classified as difficult to polish showed smaller decreases in Fe, Mg, P, K and Mn compared to genotypes classified as easy to polish. The concentration of other elements, e.g. Zn, S, Ca, Cu, Mo and Cd, showed comparable reductions (<30%) irrespective of polishing technique or ease of polishing. The different patterns of polishing losses of minerals reflected their distribution within the grain. Five-fold differences in the reduction of Zn concentration during polishing were observed for different genotypes which started with similar Zn concentrations in the unpolished grain, thus showing clear potential for selecting genotypes with reduced polishing losses of Zn.     

Agricultural intensification in the Sahel – The ladder approach

Agricultural intensification in the Sahel can be described as climbing a ladder. The capital, labour, management and institutional requirements increase when farmers climb the ladder, but the potential gains are also higher. The first step on this ladder are agricultural practices without any financial outlay but with increasing labour demand, such as organic fertilizer use, seed priming, water harvesting and harvesting grains at physiological maturity to improve fodder quality. The next step on the ladder is the use of micro-fertilising, popularly known as microdose, at the rate of 0.3 g NPK fertilizer per pocket in sorghum and millet. The following step is the development of improved crop/livestock systems characterized by use of higher rates of mineral fertilisers and manure, increasing cowpea density and improved animal fattening. The last step presented on the ladder is the development of more commercially orientated agriculture characterized by development of cash crops, milk production and/or agroforestry systems. Evidences from the field support the observation that farmers intensify their production in a sequential manner similar to the way described in this paper. The technologies presented can facilitate agricultural intensification by reducing the risks and minimising the cost in agricultural production.     

Plant species richness and diversity in urban and peri-urban gardens of Niamey,Niger

Urban and peri-urban agriculture (UPA) significantly contributes to food and nutritional security of urban dwellers in many African countries. Economic and demographic pressures often lead to transformation of subsistence-oriented traditional homegardens into commercial production units. Such transformation is claimed to result in decreasing plant diversity, particularly of local species. A study was therefore undertaken in 51 gardens of Niamey, Niger, to assess the factors determining plant diversity and the suitability of UPA for in situ conservation of plant genetic resources. In each garden, the number and abundance of all human-used plant species were determined, and species density, Shannon index and Shannon evenness were calculated. In the 51 surveyed gardens, a total of 116 plant species were cultivated, most of them for the production of fruits or vegetables. Annual vegetables dominated, particularly exotic species grown for sale. In the cold season, an average of 14 species were cultivated per garden, the Shannon index was 0.96 and evenness was 0.39. Commercial gardens had a species richness similar to that of subsistence gardens, but a lower evenness (P < 0.005), caused by the dominance of a few vegetable species. Gardens of immigrants had a lower Shannon index than those of members of the local Djerma ethnic group. Stepwise multiple regression analysis showed significant influence of various variables on plant species richness and diversity parameters: garden size (richness and Shannon index), ethnicity of the gardener (richness and evenness), gender of the gardener and cash-oriented production (evenness), household size (richness) and garden possession status (Shannon index). Cluster analysis revealed the existence of five garden types. The highest species richness and diversity, particularly of perennial and local species, was found in large, peri-urban, commercial gardens managed by relatively wealthy, elderly gardeners with large families and a regular non-agricultural income.     

甘蔗糖料压榨系统的现况及新技术方案

本文论述了辊式压榨机的现状及其技术改进趋势,并分析了其固有缺陷,认为这是造成甘蔗汁液排放困难、重吸现象严重的根本原因,进而提出了改变压榨形式,延长压榨时间,采用外力排放糖汁等新的压榨技术方案,通过改善甘蔗糖料的压榨过程,强化固液萃取(渗出)分离过程,消除重吸现象,提高压榨效率,取代传统辊式压榨机,降低能耗,以满足清洁生产之需要.     

Plant available soil water at sowing in Mediterranean environments—Is it a useful criterion to aid nitrogen fertiliser and sowing decisions?

In regions where rainfall is low and variable, water stored in the soil profile prior to sowing can alter yield expectation and hence management decisions. Thus, wheat farmers in Mediterranean regions may be able to benefit from knowing the amount of soil water at sowing by optimising their nitrogen (N) fertiliser management and by deciding on whether or not to sow a crop. We used the ASPIM-Nwheat model to explore how levels of plant available soil water (PAW) at sowing, N fertiliser rate, soil, site and season-type (below or above median rainfall) affected wheat yields at sites in the Mediterranean area of southwest Australia. Overall, the greatest influence on yield potential and the consequent N fertilisation requirement was season-type. The additional yield per mm PAW at sowing was generally higher in seasons with below median rainfall, except when yields were severely water-limited by below median rainfall of <222 mm combined with <40 mm PAW at sowing on light clay soil with 109 mm plant available water capacity (PAWC). Sowing was generally warranted; only on light clay soil with <10 mm PAW at sowing and below median rainfall of <222 mm was there an opportunity for a conditional sowing strategy. Scope for varying N fertiliser rates with PAW at sowing was limited to soils with higher PAWC (109 and 130 mm, respectively) in below median rainfall seasons at the wetter site (295 mm mean seasonal rainfall), and in both season-types at the drier site (225 mm mean seasonal rainfall). Only in these combinations, soil water at sowing modified the optimal N fertiliser rate for maximum average yield resulting in significant interactions between PAW at sowing and N fertiliser rates. Similar interactions were found for a site in the Mediterranean Basin and a site in the eastern Australian subtropics on soil with high PAWC (183 and 276 mm, respectively). In contrast, there was no benefit from modifying crop management based on PAW at sowing on soil with low PAWC (i.e. sandy soil) and/or under conditions of high in-season rainfall. The conditional N management approach becomes more viable as the proportion of water stored in the soil prior to sowing increases relative to total crop water use and as the PAWC of the soil increases. Knowledge of PAW at sowing × N fertiliser rate interactions in a particular soil × site × season-type context can help to identify sites where a more targeted N management dependent on amounts of PAW at sowing is potentially profitable.     

Finding suitable growth models for turbot (Scophthalmus maximus L.) in aquaculture 1 (length application)

Growth data of two different commercial turbot (Scophthalmus maximus) strains reared in recirculating aquaculture systems were analysed with the aim to determine the most suitable model for turbot. To assess the model performance three different criteria were used: (1) The mean percentage deviation between the estimated length and actual length; (2) the residual standard error with corresponding degrees of freedom and (3) the Akaike information criterion. The analyses were carried out for each strain separately, for sexes within strains and for a pooled data set containing both strains and sexes. We tested a pre‐selection of six models, containing three to four parameters. Models were of monomolecular shape or sigmoid shape with a flexible point of inflection including the special case of monomolecular shape in defined cases of their parameters. The 4‐parametric Schnute model achieved best fit in 62% of all cases and criteria tested, followed by the also 4‐parametric generalized Michaelis–Menten equation in 48% and the 4‐parametric Janoschek model (38%). The von Bertalanffy growth function achieved only 29%, Brody 24% and a new flexible function 19% best fit. In a 1–1000 day growth‐simulation sigmoid shaped curves were produced by the Schnute model in 71% of cases. The Janoschek and the Michaelis–Menten model each produced sigmoid curves in 57% of all cases. This indicates that a flexible 4‐parametric function reflects the growth curve of turbot the best and that this curve is rather sigmoid than monomolecular shaped.